Subject: Which parts go with which?
From: Rotary Engine
Date: 4/11/2007, 4:10 PM
To: AARotary Engine


I bought 3 13B engines sight unseen. They were
described as rebuildable,
two 91s and a 86. It turns out they were a box full
of parts. I thought
they were assembled engines, but then I didn't ask.
Dumb me.

Some of the parts are marked as #1, #2 and #3, all 3
e-shafts and some
of the rotors and some of the other parts. None of
the counter weights
are marked. I can't see any complete set of parts
that are marked the
same to assemble a complete engine.

In general the parts do indeed look re-usable. The
ones that we have
measured pass Mazda's tests.

The problem is that I don't know which goes with
which. I am especially
concerned about the counter weights. None of the
counter weights are marked.

Is it permissible to just assemble an engine with
whatever parts seem to
belong to each other?

What to do?

Doc Custer
Retired Software Engineer and sometime Audiologist

As well you should be Doc :)
I don't know how to identify counter weights and I
doubt any
of the shop manuals tell you how either. I could be
wrong
but your best bet is call Mazdatrix and ask for
John.
Other than that people mix and match all the time as
long
as the rotors are the same. I would for sure have it
professionally
dynamically balanced.

Take some detailed pictures of the counter weights
and
upload them. Some one on here might recognize them.


Paul Lamar ...No rotor no motor.

Paul
I think it was in this thread that a comment was
posted indicating a couple of measurements for rotor
combustion depression depth. I meant to save it, but
managed to lose it. Seems like useful info for a parts
scavenger like me. Can you please repost it?
regards, Robert

Give me some key words to search for. A lot of water over
the dam since then. I'll try rotor depression.
Nope that did not work. Are you sure it was not on the Mazdatrix
web site.
Paul Lamar ...No rotor no motor.

April 4th - "Re: Rotor "Weight Code" Stamp" , measurements in
attached pics.

Cary

We got it Cary. Thanks

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.