Paul / all



To make a 20B mount I need the dimensions of the oil pan mounting hole
positions and I was hoping I could get this from this rotary list.
Would be much appreciated.   Also, the locations of the holes in the
windage tray.  I need to know if there needs to be a CG shift  forward
from the 13B position?



Also, does the 20B use the same water pump cartridge as the 13B?



Rick Irwin

Cozy soon 20b?


I don't have those dimensions but if you use a 1/8th thick sheet of Lexan
and place it where the pan goes you can center punch the hole positions.

The need for a windage tray is over rated. The locations are mainly
a function of the parts such as the pressure regulator and the oil
pick up tube that must pook through them.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.