Here is Doc and his three generation family.
He has done a very fine job on this production low aerodynamic loss
p-port slide throttle.
He is going to ship it to me and I will see if I can get Mazdatrix or
Racing Beat to distribute it.
--
Paul Lamar ...No rotor no motor.
Paul, I noticed there is no provisions for idle adjustment. Unless I'm missing something?
Buly
Its there. There is a collet that holds the throttle cable. You losses the
collet and slide the cable until it bottoms out on the idle RPM you want.
That is Doc's design.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.