Here's one way a small alternator can be mounted on a Renesis:
* 60 amp Delco alternator (8 lbs)
* Brackets made from 0.10 4130
* the upper bracket uses 2 existing 8mm and 2 existing 6mm holes in the
block
* the lower bracket uses 3 8mm studs in the front housing (is this part
of the housing strong enough?)
* Alternator slide adjuster cut down from stock Rensis part
* 12mm, 4" diameter idler pulley
* Stock water pump pulley used to underdrive the alternator
* Very ugly welding 8-)

Scott Gettings


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.