Here's one way a small alternator can be mounted on a Renesis:
   * 60 amp Delco alternator (8 lbs)
   * Brackets made from 0.10 4130
   * the upper bracket uses 2 existing 8mm and 2 existing 6mm holes in the
   block
   * the lower bracket uses 3 8mm studs in the front housing (is this part
   of the housing strong enough?)
   * Alternator slide adjuster cut down from stock Rensis part
   * 12mm, 4" diameter idler pulley
   * Stock water pump pulley used to underdrive the alternator
   * Very ugly welding 8-)

   Scott Gettings

Scott,
Looks like a very good solution to me.  Let me ask one question.  Since
the alternator is adjustable, is the idler really necessary?

Mark S.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.