Paul,
I've incorporated your suggestions about heat balance and VE.
The result is that now both combustion temperature and exhaust
temperature are calculated on the basis of heat balance, rather than
entered by the user.
This means that exhaust temperature now changes with different air fuel
ratios -- hotter for leaner mixture, cooler for richer. This is yet
another step forward in realism.
Combustion temperature also varies as a result of thermal efficiency,
which is a function of the overall heat balance.
So you may be wondering, where did I come up with the heat balance
numbers. Well, I don't have such data for the rotary, but I do have thos
heat balance charts for the Wright 3350 Turbocompound that you found in
that old SAE paper.
I started with that and amde some adjustments downward to take into
considerration that the rotary is not quite as thermally efficient as
the piston engine.
If you have heat balance data for the rotary, please send it.
The results seem to show what one might expect. Let me know what you
think.
Regards,
Gordon.
Very Nice.
Allen
Houston
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.