Well, 2 clamps are not used everywhere, some fittings only have one, and
some have two on one tube and 1 on the other.

Never-the-less, beautiful work, and well laid out. I wish the KIS had as
much room under the cowl as the cozy -- make it a lot easier to install.
Bill Schertz
KIS Cruiser # 4045

Bill, the use of double or single clamp was calculated by using a very complicated
proprietary formula at the time. I called it NSF formula :)
These are  old photos. Now I have doubles on all.
Buly

-------
Very nice work Buly, I understand NSF

Bill Schertz
KIS Cruiser # 4045



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.