Mark Steitle came up with the best solution.
Mount the sensor ring on the other side
of the e-shaft pulley. Make sure the wires
can not be ripped out by a failed belt.
--
Paul Lamar ...No rotor no motor.
It seems that someone else always comes up with a better idea after
I've spent a ton of time on a solution 8-)
I'll see if this will work for my Renesis. There aren't many studs
or bolt holes available to bolt a bracket to on this area of the front
of the engine. Other areas might be better re-mounting locations. I
suppose if one re-mounted the sensor ring 90 degrees or 180 degrees
off, and moved the sensor by the same amount, there would be no
reprogramming necessary?
BTW. for those who would like to have a free, relatively powerful 3D
drawing tool, try:
http://sketchup.google.com/
Of course, they are trying to sell the Pro version when you need more
capabilities.
You can create simple extrusions and lots of complex shapes quickly.
Use the "instructor" window to get up to speed right away. You can't
export much from the free version of these files, but you can screen
cap the window and create a .jpg from that pretty easily.
Scott Gettings
That's life Scott :) I would have told you about it when I was there but
I did not see it until I stopped in Austin on the way home. Sorry.
However, sometimes one must settle for what one already has as otherwise
it will take one forever to keep changing things and consequently one's airplane will
never fly. It also will not hurt to have two solutions to the same problem.
Namely the idler pulley.
Moving the pickup and ring X number of degrees should work I think.
As long as it fires in the same number of e-shaft degrees relative to
TDC of rotor one that it did before.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.