Subject: OEM engine computer (Stock Engines in Homebuilt Planes
From: Rotary Engine
Date: 5/4/2007, 5:38 PM
To: AARotary Engine


"Sparks at open and close of a switch are caused by momentum due to
high load." That is interesting. Do you have an Internet references for that?
I thought it was the .0000001 space between the contacts that caused
the problem. Something to do with ionized air or some such.

They may not have any current flow but they do have a voltage difference.

Paul Lamar

   I guess I'm wrong. I have tryed to explain to myself why motor
contactors, same voltage as anything else, likes to produce sparks.
Does it have something to do with the coils in the motor?
   Once a spark is produced does it set up a condition to continue
sparking? Cleaner metal, change in the air?


-- 
Blake C. Lewis

I am not saying you are wrong.

Paul Lamar

Motor contactors spark on opening the circuit because of the inductance of
the motor windings. Motor windings usually have a large inductance. In an
inductor (usually thought of as a coil, but could be as simple as a straight
length of wire) the magnetic field builds up when the circuit is energized.
When the circuit is broken, the magnetic field collapses inducing a voltage
in the motor windings. The energy in the magnetic field has "nowhere to go"
because the circuit has been broken but the energy MUST go somewhere (can't
be destroyed, remember?). The result is that large voltages can be generated
which cause the spark (arc). During the arc, the energy in the field is
dissipated, usually as heat and light. The arc is very hot (ala arc welders)
and can generate plasma which is conductive. Plasmas are atoms which have
been "torn apart," usually by heat.

It is an imperfect world. There is no such thing as a pure resistance,
capacitance or inductance. Every circuit has some inductance, some
resistance and some capacitance. So sparking at the switch contacts when the
circuit is broken is not unusual, even when there is no component in the
circuit labeled an inductor (coil). There is a whole field of electrical
engineering devoted to dealing with this arc because the arc destroys the
switch contacts over time. If not dealt with properly it can lead to
catastrophic results.

Doc Custer
Retired Software Engineer and sometime Audiologist


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.