Subject: Spark Info -- WAS: Re: OEM engine computer (Stock Engines in Homebuilt Planes
From: Rotary Engine
Date: 5/4/2007, 5:35 PM
To: AARotary Engine


> ...
    I guess I'm wrong. I have tryed to explain to myself why motor
contactors, same voltage as anything else, likes to produce sparks.
Does it have something to do with the coils in the motor?
    Once a spark is produced does it set up a condition to continue
sparking? Cleaner metal, change in the air?

YES!

Remember these simple rules:
    COILS resist any change in CURRENT.
    CAPACITORS resist any change in VOLTAGE.

Take, for instance, an ignition COIL.  It will resist any change in
current flow.
1) contacts SHORTED = max current flow (through the coil)
2) contacts open
3) coil attempts to keep X amps flowing

How?  Simply by drastically increasing the VOLTAGE across the contact
gap so the current continues to flow (causing a spark).  Of course this
consumes the energy stored in the coil, and eventually the arcing stops
as the coil energy is depleted.

Side note: that's why you need a condenser (AKA capacitor) - to protect
the contacts.  The capacitor resists the drastic voltage change across
the contacts, and absorbs the energy from the coil (to prevent arcing).
Simple, no?

*****

Most low-voltage sparks are caused from too much current in too little
contact area, such as when a wire/switch/whatever FIRST makes contact.
Until enough surface area has mated to carry the available current, you
will be arc welding on a micro scale.

-- 
Vince Orton


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.