That alternator looks like the one I bought on ebay for $50.00. I'll have
to
check the number when I go out to the hangar. Does anybody know the fuel
flow rate around 6000 rpm???  Karibian

What gear box do you have and what does your intake manifold look like?


Paul Lamar ...No rotor no motor.

An off beat question, does anyone know the depth of Greddy's all aluminum
RX-8 oil pan ss measured from the block mating surface to the bottom of the
pan? Thanks, milo

My guess is the stock pan is 12 by 10 by about 2 or 240 cubic inches holding
only about one quart. So + 600 cc is .634 quart. That is not much increase.
I doubt it is much deeper at all.
Best to send Greddy email and ask.

-- 
Paul Lamar ...No rotor no motor.

Paul/ Milo,
Is that wider or longer, I'm guessing it's wider - either way it's a good
idea.
George (down under)



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.