> Hi All,
>
> Yes, I'm new here... Thought that you might find this thing
interesting.
> This paper is from alternative motors symposium, held on
Vancouver, CA
> on 11-12 Aug. 1986.
>
> Some of you know all about this SCORE issue, but for us others
here's a
> quite neat presentation.
>
> To summarize, JD people successfully run their rotary engine with
JET A..
> with a cruise SFC of .38-.41 lb/HpHr / 231-240 g/KWh. They did it
with a
> "spark/pilot-twin-injection" setup, all this is explained on
document.
>
> Format is US legal, works on A4 printers too. If you find any
problems,
> please let me know.
>
> Cheers,
>
> Petri Flander
> Engineering student
> Helsinki, Finland
>
> Thanks for the pdf file Petri. Too big to publish but here are
some of
> the tables and charts. I don't know why it did not go into
production.
> --
> Paul Lamar ...No rotor no motor.
Petri, Paul
I and others would probably like to print out the file if you can
give us a
source.
Thanks
Doug Fir
Lets try publishing the pdf. Here it is.
The BSFC results are suspect. I think RPI was unable
to duplicate these BSFC results when they tested the engine
later on. If the BSFC really was this good it should have gone into
production. Francois (Mistral) should also have been able to come
close to these results although I do not know if he (Mistral) tried
it with a turbocharger. I do know Wankel Gmbh had a turbocharged, direct
injection, spark assisted two rotor engine running but they did not
claim
this low of a fuel burn (BSFC).
Paul Lamar ...No rotor no motor.
I briefly scanned through the PDF. Interesting. It doesn't appear that
they had actually run the engine at the time this article was
published. It appears only that the littlest engine was run, but that
they didn't publish the fuel consumption numbers for that engine in this
article. Hmm. All of the charts I see show "ESTIMATED." Wink wink..
Matt-
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.