Subject: Racing Beat P Port Rotor housings
From: Rotary Engine
Date: 5/8/2007, 9:01 AM
To: AARotary Engine



> Gordon ,
> I'm not going against anything Paul has said, however if I could add a
> little in saying, I asked the same sort of questions of mechanical
> engineers
> and their answer was that that most engines tolerate some overlap (can't
> remember the degrees exactly). So the overlap of the RX7 is in line with
> this tolerance. I can't imagine the P-port being any worse in the RX8,
> although I haven't sat down and tried to work it out in degrees. We are
> speaking here primarily about idle as the higher RPM eliminates
> contamination, as the exhaust is self evacuating at the higher exhaust
> speed/RPM. In fact it's more likely to suck in some inlet charge at
> higher
> RPM.
> George (down under)
>
> George,
>
> Yes, I believe an overlap between exhaust close and intake open can
> indeed promote cylinder filling.
>
> In fact I have heard racing types say that the suction effect of the
> exhaust can be several times more powerful than the relatively weak
> suction effect of the piston moving down the cylinder.
>
> The key appears to be tuning the length of the exhaust pipes to take
> advantage of the negative pressure wave, which is reflected back up
> the pipe (toward the cylinder) at the point where there is a
> discontinuity in the pipe, such as at the exhaust collector.
>
> This negative pressure wave can be so strong in racing engines with
> lots of valvle overalp and tuned headers, that it is said to
> actually produces something of a supercharging effect by
> accelerating the incoming charge.
>
> I would imagine that the rotary could be tuned in the same manner,
> but I don't think this is needed in an aircraft engine. And
> obviously the idle quality would suffer.
>
> It's interesting that the Renesis has zero overlap and yet makes
> very good power. Anyway, I think it's pure speculation how a
> p-ported Renesis engine is going to perform. But I think it would
> certainly be a worthwhile project to experiment with.
>
> Regards,
>
> Gordon.
>
> Gordon,
> My speculation is that the zero overlap arrange came from Mazda's
> experiments with hydrogen fuel. The rotary is excellent (for hydrogen)
> with zero overlap. They did a functional show/test car running on >
hydrogen.
> Bill Jepson

Bill,
Very interesting - why is it so with Hydrogen?
BTW I'm back from my sojourn to Western Australia through the center of
Australia. 18,000 k's on the 1800 Suzuki, no problem with the bike. Went
through swollen rivers and all, but the whether was against me all the way,
hoping to do it by plane next time as I'm getting too old for those hard
yards.
George ( down under)

George,
Hydrogen is so easy to ignite due to a wide range of combustable mixtures.
The trouble on piston engines if there is the slightest wobble the mixture
ignites and blows up the intake manifold. The less overlap the better.
Bill Jepson



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.