Subject: p-port intake flange combo
From: Rotary Engine
Date: 5/8/2007, 6:03 AM
To: AARotary Engine


Have we tried this???
the hole on the bottom of the flange in RED would be where the stud is protruding from the housing. If that will work I don't know.
I don't know the exact DIMS on the ports.
But the flange is correct

Tony

Here are the exact dimensions. You must remove that stud.
-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.