Mark,

   If it is possible, I would suggest mounting it to the non-engine
   side of the
   rubber on the S-beam. Someone reported things fatiguing when mounted
   on the
   engine side and after moving the mounting to the non-engine side the
   fatigue
   went away.

   No personal experience, just passing on what I heard. Seems to make
   sense
   though.

   Doc Custer
   Retired Software Engineer and sometime Audiologist



So, Doc, your suggestion would be to place an AL angle  which spans from
beneath each lord bushing, and then hang the intake from that angle?

Mark


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.