Subject: Photos Mechanical fuel injection.
From: Rotary Engine
Date: 5/9/2007, 2:52 PM
To: AARotary Engine



   From: karibian

   Interesting.

   --
   Paul Lamar ...No rotor no motor.


   Is there a story or explanation (outside the obvious) that goes with
   these pictures? Is that a 3/8" ball valve (hopefully with a chromed
   ball)?

   Allen
   Houston

   I suspect Karibian is building something like this.

   http://www.rotaryeng.net/mech-fuel.html


   Paul Lamar ...No rotor no motor.

   WOW Paul!

   I guess it's been awhile since I perused the website. Thanks for
   uploading all that info. I've been saving as many emails as I can when
   I get to the engine part of my project. I'm still cleaning out the
   garage and moving all the grandkid junk to storage. I can't get my wife
   to sell it or give it away.

   Allen
   Houston

   I think there is a bit of misunderstanding on how exactly how this
   system
   works. Here are a few more 3D that should clarify the system.
   The Teflon slide itself meters the fuel.

   The needle valve controls the leaning only.
   --
   Paul Lamar ...No rotor no motor.


Paul,

Those slide throttles are the ones that Doc just went into production
with, right?  I remember reading about them (again) in one of the
SunNFun emails that you sent out.  Now all we need with a p-port is to
come up with the inlet runner sizes/lengths for optimal performance.
(When I say we, I mean ya'll. LOL!)  I don't remember if Docs parts had
flange connections similar to the ones shown on the website for the 900
HP 13B you have on there?  Anyway Paul, as you know I have no background
in racing/mechanics.  Let me take that back.  I raced AMA Sanctioned 125
cc Class motorcross back when I was like 22 or something.  But I had a
great mechanic that rode a Yahmaha RD-350.  It got expensive quickly, so
my wife and 2 kids washed that out after about a year.  So my learning
curve here is still exponetial.  I guess with this mechanical system all
one needs is a way to fire the plugs.  Can that be done with standard
equipment or is a programmable controller needed?

Paul, all the info you have brought to bare has greatly enthused and
interested me and I thank you and all the others that post their
findings here and other places for us guys that need the education.

Allen
Houston

Yes they are. However they need to be modified to work as a mechanical
low pressure fuel injection. Also nobody has built one yet except
Kariabian so you would be on the bleeding edge :) There is no accelerator
pump provision so you have to feed in the throttle slowly or the engine
will quit I think. I am not sure about that. They are fundamental the same as a
Posa or Ellison TBI.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.