Subject: Lastest thinking in RV10 motor mounts.
From: Rotary Engine
Date: 5/14/2007, 7:48 AM
To: AARotary Engine



This is a two rotor of course but the same ideas apply
to a 3 rotor. Comments anyone? See any problems?
--

I don't see anything that can take the vertical load from the landing
gear strut. It looks like the strut is 90 from the attached members.
-- 
Blake C. Lewis

Not shown in the 3D as this is an add on to the stock motor mount.
Here are some pictures of the stock mount showing the nose gear
supports. The unneeded tubes are cut away and the rotary MM specific
tubes are added.

-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.