Subject: Windows help needed
From: Rotary Engine
Date: 5/16/2007, 11:24 AM
To: AARotary Engine


   Can anybody give me step by step directions on connecting two
   Windows computers, both running XP, together using and Ethernet cable.
   I have a lot of Rhino files to transfer from my old broken windows
   computer to another working windows computer.

   A 4 gig flash drive is too slow.
   --
   Paul Lamar ...No rotor no motor.


   Simple
   Pull the drive from the old non working computer and set it to slave
   mode with it's jumpers and then place it in the new working computer and
   then you can pull the needed files off of the old drive.
   Jared Humphrey

   I have done that in the past and it works very well but I can't do
   that here.
   Both computers are note books or lap tops. No second drive possible
   or perhaps
   just different physical sizes.

   Paul Lamar ...No rotor no motor.

You can also try going and buying a USB external drive cases. Any of the
big electronics stores should sell them.
Jared Humphrey

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.