Can anybody give me step by step directions on connecting two
    Windows computers, both running XP, together using and Ethernet cable.
    I have a lot of Rhino files to transfer from my old broken windows
    computer to another working windows computer.

    A 4 gig flash drive is too slow.
    --
    Paul Lamar ...No rotor no motor.


Simple
Pull the drive from the old non working computer and set it to slave
mode with it's jumpers and then place it in the new working computer and
then you can pull the needed files off of the old drive.
Jared Humphrey

I have done that in the past and it works very well but I can't do that
here.
Both computers are note books or lap tops. No second drive possible or
perhaps
just different physical sizes.

Paul Lamar ...No rotor no motor.

They need to be networked together either with wireless or through a bridge
(router).
Cory Carpenter



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.