Subject: Vacuum Guages
From: Rotary Engine
Date: 5/19/2007, 9:17 PM
To: AARotary Engine


I tried a tube cut off at a 45 deg angel sticking straight into the
exhaust stream.  It just barely moved the needle on the vacuum guage.
I wish I had known about those Jeg's inserts.  I would have given them
a try.

Bob W.

snip......

-

What inserts are you talking about Bob?

Allen
Houston

The ones mentioned by Vince Orton in an earlier message.  See:
http://www.jegs.com/webapp/wcs/stores/servlet/product_10001_10002_21252_-1

If that wraps and doesn't work use:
http://tinyurl.com/2p4q7s

Bob W.

-- 
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://www.roblinphoto.com/shop/



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.