The valve hole is 7/16th and fuel rail is 3/8th and there are two "O"
rings on the valve. The valve was made from a 1x2x5 inch block of
aluminum. I just ordered two fuel pumps like the attachment I previously
sent you. Karibian

OK that might work. That is connected to the throttle and is the main metering
supply. So how do you lean it?

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.