Paul

Getting a quote for some oval tubing for the intermediate ports.
right now it will be just straight oval tubing in lengths of 6ft
the oval is custom extruded for the inner ports. Material is 6061 with a .065 wall. the tubing can be mandrel bent into a round any thoughts for the bend profile? I initially will bend it at a 3":in radius but the idea is to keep the manifold as alow a profile as possible like Mistral has done.

Have you seen DR Gas?

www.drgas.com
click on the oval tubing catalouge this is an idea of what can be done. with oval tubing.

tony

To work well the oval cross sectional area must be the same as the round area. Merely
flattening a round tube won't work for an intake manifold.

Paul Lamar

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.