A problem with side mount radiator is it interferes with
the symmetrical schertz beam motor mount. First 3D showing a
RV10 set up.
A high power 3 rotor will require around 900 cubic inches
of rad volume to cool adequately so it requires a lot of room.
It is possible to build an unsymmetrical schertz beam
that will provide more room for a 900 cubic inch rad side mounted
radiator.
This will require a larger Barry rubber bushing to take the
increased load and a wider schertz beam. The hot side of the engine
still has the longer schertz beam to accommodate an internal
muffler or a turbo charger.
The advantages of a side mount radiator is it requires
no modification to the stock cowl. The right cowl opening
feeds the water rad. The oil cooler, not
shown in these 3Ds, can be mounted on the hot side using
the left cowl opening.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.