Go into graph mode (buttons 3 & 4)
Then activate "Track Mode" (buttons 1 & 2)
Then set the program knob and mixture knob at the 12 o'clock position
Set  the Mode selector to "0"
and finally (with the engine running)  press the Store button to start
the auto-tune.

Mark Steitle

Perhaps it won't work is because you don't have the procedure quite right.
Do this with the engine running - The first three steps are correct; but you
then select mode "9", and do not need to press store button.

Al

So Al how well does this work? Does it keep the mixture constant
as you change altitude? As you change prop pitch?

Paul Lamar

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.