Subject: Mikuni RX8 P-port engine
From: Rotary Engine
Date: 5/27/2007, 8:24 PM
To: AARotary Engine


    Mikuni HRS48 is looking good. I'll mount the carbs close to the engine
    for good idle and low profile and use a 25 inch long stack.
    Mikuni claims 120 HP per carb which is perfect for our use.
    If a Mikuni can live on a hog it can live on a rotary.

    Thanks for the tip Gordon.
    --
    Paul Lamar ...No rotor no motor.

**** Hi Paul,
your dyno run would be a good opportunity to measure how effective the
vacuum leaning method is on A/F ratio by winding the screw in and out
I look forward to seeing your results,
BR, Dave McC


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.