Subject: Mikuni RX8 P-port engine
From: Rotary Engine
Date: 5/27/2007, 9:28 PM
To: AARotary Engine



Mikuni HRS48 is looking good. I'll mount the carbs close to the engine
for good idle and low profile and use a 25 inch long stack.
Mikuni claims 120 HP per carb which is perfect for our use.
If a Mikuni can live on a hog it can live on a rotary.

Thanks for the tip Gordon.

------------------------------------------------------------

Here is the tunning manual. Piece of cake.
http://www.mikuni.com/fs-carburetor.html

If this works it is a major breakthrough for the rotary in general.
I would not be a bit surprised if it finds it way into car racing.

Mikuni is in my neck of the woods so perhaps I will hit
them up for some test 48 mm carb loaners.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.