Dave,
I thought about manifold vacuum and that might work. The venturi
vacuum is a stronger signal though. If manifold vacuum does work
though, you may be able to use this leaning scheme with Webers too.
Regards,
Gordon.
****** Hi Gordon,
The manifold vacuum system has been proven on dyno runs, so it does
work. Bear in mind it is only a pressure sense, little or no air
actually flows.
In Contact, some years back, I saw a sidedraft Weber fitted to a
Corvair in a KR.
As you know,the Weber has a separate small jet system for start
enrichment. In this KR the carb was jetted for sea level with start
enrichment on and as the airplane climbed the 'choke' was backed off to
lean the mixture.
This choke feature is fitted to Weber carbs up to 48 mm; I believe the
big racing carbs do not have start enrichment.
I notice that the flat slide Mikuni HRS 42, 45 etc have a similar
enrichment circuit, so maybe this may be worth looking at.
Your comments on carbs are much appreciated, I am a great exponent of
"K I S" in airplanes.
BR, Dave McC
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.