Subject: Mikuni RX8 P-port engine
From: Rotary Engine
Date: 5/28/2007, 5:08 AM
To: AARotary Engine


Mikuni HRS48 is looking good. I'll mount the carbs close to the engine
for good idle and low profile and use a 25 inch long stack.
Mikuni claims 120 HP per carb which is perfect for our use.
If a Mikuni can live on a hog it can live on a rotary.
Paul Lamar

Hi Paul,
what inlet tract length are we looking at here?
BR, Dave McC

Total length from throchoid surface to trumpet mouth is 25 inches.
BTW since there are two separate carbs that gives the Mikuni's an
advantage over the dual throat 58 mm Weber as the Weber throats are too close
together to mount next to the p-ports. In other words the Mikuni's
ought to idle pretty good becasue the slides are close to the rotor
housing.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.