Subject: Leaning a constant depression carb.
From: Rotary Engine
Date: 5/30/2007, 12:14 PM
To: AARotary Engine


Use a needle valve to change the amount of dynamic pressure
applied to the top chamber. Just a small controlled leak would also
probably work.

Unfortunately this super simple scheme won't work on the Mikuni 48 mm.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.