Subject: Leaning a constant depression carb.
From: Rotary Engine
Date: 5/31/2007, 5:44 PM
To: AARotary Engine


Use a needle valve to change the amount of dynamic pressure
applied to the top chamber. Just a small controlled leak would also
probably work.
Paul Lamar

****** Hi Paul n All,
I cannot see this changing the A/F ratio. If the piston descends then
it reduces both air and fuel. That is the whole idea of the CD carb. We
need to reduce the fuel discharge while maintaining the airflow; so the
needle must move into the jet, or the jet move over the needle,
independently of the piston.
FWIW, Dave McC

Sounds right Dave.  I did not think of that. I guess that won't work.
Perhaps we need to put the air leak into the manifold after the
needle after all.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.