Subject: Mikuni RX8 P-port engine
From: Rotary Engine
Date: 6/1/2007, 9:54 PM
To: AARotary Engine



Mikuni HRS48 is looking good. I'll mount the carbs close to the engine
for good idle and low profile and use a 25 inch long stack.
Mikuni claims 120 HP per carb which is perfect for our use.
If a Mikuni can live on a hog it can live on a rotary.

Thanks for the tip Gordon.
-- 
Paul Lamar ...No rotor no motor.


With this thread on carbs how does this affect the use of the slide
throttle?  Do you just mount the carbs close to the ports?  What about
intake tuning, how is this affected?  Thanks for any info

Joe Berki
Limo EZ

These carbs have the slide throttles built in.
Intake tuning still works. The 25 inch intake runner are mounted to the intake
side of the carbs and the carbs are mounted next to the rotor housings.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.