Subject: Sight glass for oil level
From: Rotary Engine
Date: 6/1/2007, 4:59 PM
To: AARotary Engine


I've got a small leak in the oil pan I made a while back, and rather
than trying to clean the aluminum enough to to to weld it, I'm just
going to start from scratch and build another. There's plenty of scrap
3/16 plate 6061 at work, and it should only take about 3-4 hours to
build, if that. I figure that I can go whole hog and make a 6 quart pan.
I want to incorporate an oil sight glass so I can tell the oil level by
sight. Anyone have a source for oil sight glasses? I'm talking about the
kind you see on the oil pans of many motorcycles. Anyone?


Brian Trubee

Whole hog? Six quarts? Eight quarts would be whole hog :)

Paul Lamar

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.