Use a needle valve to change the amount of dynamic pressure
applied to the top chamber. Just a small controlled leak would also
probably work.
> Paul Lamar
****** Hi Paul n All,
I cannot see this changing the A/F ratio. If the piston descends then
it reduces both air and fuel. That is the whole idea of the CD carb. We
need to reduce the fuel discharge while maintaining the airflow; so the
needle must move into the jet, or the jet move over the needle,
independently of the piston.
FWIW, Dave McC
--------------------------
i did not see this post come up on the Newsletter; I was hoping for
comment as I have a background in SU CD carbs from years ago in
hillclimbing MGs.
BR, Dave McC
As I recall I responded and I said I thought you were right.
I am surprised you did not see the message. Perhaps it slipped away.
I am not fond of these types of carb anyway as the slide is more
in the way of the air flow due to the spring than it needs to be.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.