I've got a small leak in the oil pan I made a
while back, and rather
than trying to clean the aluminum enough to to
to weld it, I'm just
going to start from scratch and build another.
There's plenty of scrap
3/16 plate 6061 at work, and it should only
take about 3-4 hours to
build, if that. I figure that I can go whole
hog and make a 6 quart pan.
I want to incorporate an oil sight glass so I
can tell the oil level by
sight. Anyone have a source for oil sight
glasses? I'm talking about the
kind you see on the oil pans of many
motorcycles. Anyone?
Brian Trubee
Whole hog? Six quarts? Eight quarts would be
whole hog :)
Paul Lamar
Brian,
Send me some (or all) of that old 6061 plate you've
got laying around.
I'll pay the freight!
Allen
Houston
Unfortunately, it is not I who have the plate, but my
employer. They let me use as much scrap as I
want-(they are old shelves and trays from fire
engines) but would not look favorably upon my taking
it to send out to others. If so, it would have all
disappeard a long time ago.
Brian Trubee
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.