Subject: Sight glass for oil level
From: Rotary Engine
Date: 6/2/2007, 10:21 AM
To: AARotary Engine



I've got a small leak in the oil pan I made a while
back, and rather
than trying to clean the aluminum enough to to to
weld it, I'm just
going to start from scratch and build another.
There's plenty of scrap
3/16 plate 6061 at work, and it should only take
about 3-4 hours to
build, if that. I figure that I can go whole hog and
make a 6 quart pan.
I want to incorporate an oil sight glass so I can
tell the oil level by
sight. Anyone have a source for oil sight glasses?
I'm talking about the
kind you see on the oil pans of many motorcycles.
Anyone?


Brian Trubee

Whole hog? Six quarts? Eight quarts would be whole
hog :)

Paul Lamar


I definitely have the room for 8 quarts. Dare I?

Brian Trubee


I gives more time to heat the oil on takeoff and climb out.
It takes more heat to warm eight quarts instead of six quarts.
My 230 HP O-470 has  12 quarts.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.