> I've got a small leak in the oil pan I made a
while
> back, and rather
> than trying to clean the aluminum enough to to to
> weld it, I'm just
> going to start from scratch and build another.
> There's plenty of scrap
> 3/16 plate 6061 at work, and it should only take
> about 3-4 hours to
> build, if that. I figure that I can go whole hog
and
> make a 6 quart pan.
> I want to incorporate an oil sight glass so I can
> tell the oil level by
> sight. Anyone have a source for oil sight glasses?
> I'm talking about the
> kind you see on the oil pans of many motorcycles.
> Anyone?
>
>
> Brian Trubee
>
> Whole hog? Six quarts? Eight quarts would be whole
> hog :)
>
> Paul Lamar
I definitely have the room for 8 quarts. Dare I?
Brian Trubee
I gives more time to heat the oil on takeoff and
climb out.
It takes more heat to warm eight quarts instead of
six quarts.
My 230 HP O-470 has 12 quarts.
Paul Lamar ...No rotor no motor.
What is the volume in cubic inches of a Quart?
Brian Trubee
http://www.onlineconversion.com/
57.75 cubic inches.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.