Subject: Sight glass for oil level
From: Rotary Engine
Date: 6/2/2007, 4:15 PM
To: AARotary Engine


> I've got a small leak in the oil pan I made a
while
> back, and rather
> than trying to clean the aluminum enough to to to
> weld it, I'm just
> going to start from scratch and build another.
> There's plenty of scrap
> 3/16 plate 6061 at work, and it should only take
> about 3-4 hours to
> build, if that. I figure that I can go whole hog
and
> make a 6 quart pan.
> I want to incorporate an oil sight glass so I can
> tell the oil level by
> sight. Anyone have a source for oil sight glasses?
> I'm talking about the
> kind you see on the oil pans of many motorcycles.
> Anyone?
> > > Brian Trubee

Brian - the motorcycle-type round sight glass is also used for air
compressor sumps.

Here's the first place that Google brought me...
http://www.jwwinco.com/products/section12/index.html

Andy Hecker



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.