> > I've got a small leak in the oil pan I made a
> while
> > back, and rather
> > than trying to clean the aluminum enough to to
to
> > weld it, I'm just
> > going to start from scratch and build another.
> > There's plenty of scrap
> > 3/16 plate 6061 at work, and it should only take
> > about 3-4 hours to
> > build, if that. I figure that I can go whole hog
> and
> > make a 6 quart pan.
> > I want to incorporate an oil sight glass so I
can
> > tell the oil level by
> > sight. Anyone have a source for oil sight
glasses?
> > I'm talking about the
> > kind you see on the oil pans of many
motorcycles.
> > Anyone?
> >
> >
> > Brian Trubee
Brian - the motorcycle-type round sight glass is
also used for air
compressor sumps.
Here's the first place that Google brought me...
http://www.jwwinco.com/products/section12/index.html
Andy Hecker
Perfect. That's exactly what I need. Thanks.
Brian Trubee
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.