Paul,
   Do you happen to have a picture of a Mazda "Oval head" 550cc fuel
   injector.  I'm trying to locate some connectors and the parts guy needs
   a picture.  I'm an hour from the airport.

   Thanks,
   Mark S.


   Hmmmmm that is the 3rd gen injector. Right? Here is what I have.


   --
   Paul Lamar ...No rotor no motor.


Paul,
I found them at Five-O Motorsport.  While not cheap, the guy I spoke
with verified that the Nippondenso connectors would fit the Mazda "oval
head" injectors.  I ordered a set and will try them this weekend.

I had tried using the square head connector and they were not fitting
very well, sort of like the proverbial square peg in the round hole
scenario.  So, I decided to replace them with the correct ones.

It would be helpful if you could put pictures of the various Mazda
injectors on your site (in your spare time).  ;-)

Mark S.

You can download all the shop manuals from:
http://www.wankel.net/~krwright/cars/rx7/manuals.html
That is where that picture came from.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.