Paul,
   Do you happen to have a picture of a Mazda "Oval head" 550cc fuel
   injector. I'm trying to locate some connectors and the parts guy needs
   a picture. I'm an hour from the airport.

   Thanks,
   Mark S.


   Hmmmmm that is the 3rd gen injector. Right? Here is what I have.


   --
   Paul Lamar ...No rotor no motor.


   Paul,
   I found them at Five-O Motorsport. While not cheap, the guy I spoke
   with verified that the Nippondenso connectors would fit the Mazda "oval
   head" injectors. I ordered a set and will try them this weekend.

   I had tried using the square head connector and they were not fitting
   very well, sort of like the proverbial square peg in the round hole
   scenario. So, I decided to replace them with the correct ones.

   It would be helpful if you could put pictures of the various Mazda
   injectors on your site (in your spare time). ;-)

   Mark S.

   You can download all the shop manuals from:
   http://www.wankel.net/~krwright/cars/rx7/manuals.html
   That is where that picture came from.

   Paul Lamar ...No rotor no motor.


Paul,

Do you of where the same type books for a 20B can be found?

Allen
Houston

Unfortunately I don't think they are available in English.
Mazda never imported the 20B powered cars.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.