Paul,
Do you happen to have a picture of a Mazda "Oval head" 550cc
fuel
injector. I'm trying to locate some connectors and the parts
guy needs
a picture. I'm an hour from the airport.
Thanks,
Mark S.
Hmmmmm that is the 3rd gen injector. Right? Here is what I
have.
--
Paul Lamar ...No rotor no motor.
Paul,
I found them at Five-O Motorsport. While not cheap, the guy I spoke
with verified that the Nippondenso connectors would fit the
Mazda "oval
head" injectors. I ordered a set and will try them this weekend.
I had tried using the square head connector and they were not
fitting
very well, sort of like the proverbial square peg in the round hole
scenario. So, I decided to replace them with the correct ones.
It would be helpful if you could put pictures of the various Mazda
injectors on your site (in your spare time). ;-)
Mark S.
You can download all the shop manuals from:
http://www.wankel.net/~krwright/cars/rx7/manuals.html
That is where that picture came from.
Paul Lamar ...No rotor no motor.
Yes, but its hard to beat a good photo, especially over the
illustrations in some of the manuals. I just thought it would be
helpful for the newbies to see pictures of the different types of
injectors we commonly refer to in our posts. Also, I was shopping for
connectors for my "oval head" injectors and the supplier wanted to see a
picture in order to confirm that his would fit. I didn't have a
picture, and I'm an hour from the airport. I wanted to get the order
placed today so I could have them by next weekend. So, I was looking
for a picture I could send him. I never did find a picture with a
clear
shot of the connector portion. Locating the correct connectors can be a
real PITA. I ended up ordering a set from Five-O Motorsport.
Mark S.
Next time you are at the hangar take a picture :)
I don't have any 550cc injectors.
--
Paul Lamar ...No rotor no motor.
OK, will do.
Mark
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.