Paul,
        Do you happen to have a picture of a Mazda "Oval head" 550cc fuel
        injector. I'm trying to locate some connectors and the parts
   guy needs
        a picture. I'm an hour from the airport.

        Thanks,
        Mark S.


        Hmmmmm that is the 3rd gen injector. Right? Here is what I have.


        --
        Paul Lamar ...No rotor no motor.


        Paul,
        I found them at Five-O Motorsport. While not cheap, the guy I
   spoke
        with verified that the Nippondenso connectors would fit the
   Mazda "oval
        head" injectors. I ordered a set and will try them this weekend.

        I had tried using the square head connector and they were not
   fitting
        very well, sort of like the proverbial square peg in the round hole
        scenario. So, I decided to replace them with the correct ones.

        It would be helpful if you could put pictures of the various Mazda
        injectors on your site (in your spare time). ;-)

        Mark S.

        You can download all the shop manuals from:
        http://www.wankel.net/~krwright/cars/rx7/manuals.html
   <http://www.wankel.net/~krwright/cars/rx7/manuals.html>
        That is where that picture came from.

        Paul Lamar ...No rotor no motor.


   Paul,

   Do you of where the same type books for a 20B can be found?

   Allen
   Houston

   Unfortunately I don't think they are available in English.
   Mazda never imported the 20B powered cars.

   Paul Lamar ...No rotor no motor.


Did they ever export 20B powered cars (Cosmos) to other English speak
markets (Australia, for instance)?


Regards,

Matt-

I don't think so. But they are in NZ and AUS. I think individual's in those
countries imported them from Japan for their own use.