> JUST SO EVERYONE WILL KNOW WHAT WE'RE TALKING ABOUT.
    > Bill Jepson


   Bill,
   So are you saying this is no good for our needs i.e. Aviation with
   leaning
   facility.
   Just trying to keep up with the Carb discussion.
   George ( down under)

George,
No the 4 cycle style lectron would work fine for our applications. I
just want everyone to know what we are talking about. You could use the
controlled pressure in the float bowl for leaning as Gordon mentioned. I
would appoach the leaning system carefully so you wouldn't eend up
flipping to severe lean conditions and siezing the engine.
Bill Jepson

Not to worry Bill the rotary won't sieze. This is not a two cycle.
If you over heat the engine the rotor housings expand more than
the rotor so it does not seize like a two cycle with an aluminum piston.
If it goes to 20:1 or above the engine just quits.

Paul Lamar

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.