A while back there was a post on what to make the pickup tube out  of. I
made mine out of aluminum and now I'm wondering if it will be  adequate,
like not enough holes drilled into the tube and any stress on  the
part?? Karibian

I supply pick ups with my oil pans.  I make them out of 4130
tubing.   Mazda  stock pickups are steel.   A pick up tube failure is
not an option.   It will be fatal to the engine if not worse.   Jerry




The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.