-------------------------------------------------------------- Larry, Bill Jepson is building a 3 rotor powered RV10 and lives in your
neck of the woods. Perhaps you guys can get together.
Also I have some experience designing casting patterns using 3D programs. I did some intake manifolds.
I would like to build this two piece end housing and try out the idea. Similar to what Richard Sohn is doing. (Last four jpgs.) I work with American International foundry in San Fernando. Would you
be interested in hogging the pattern and core boxes out of aluminum? I
would keep the patterns simple by doing away with all side ports and a lot of the
front cover stuff similar to the way Everett Hatch did it. I am sure we can
sell a bunch of these things to the one rotor guys that have a severe weight problem.
Paul Lamar ...No rotor no motor.
Where is bill out of? I am based in Santa Rosa area. Larry
I think he is down in the Oakland or Berkly area.
-- Paul Lamar ...No rotor no motor.
Larry,
I work all over the S.F. Bay area. I've a rental in San Jose.
Mechanical engineering and design work. I also have a place in the gold
country near Jackson where I can be found most weekends. Our real home.
 I've got my own Solidworks seat am I'm working on some designs for the
rotary. Send Paul a private message with contact info and I'll get in
touch off line.
Bill Jepson

Larry,
I would be interested in being an Australian Contact for your products.
BTW some of your lads are looking for a single e-shaft. I am looking at
doing them locally for the local builders, but for someone with a
engineering shop it's a piece of cake.
I can help with specifications, if required.
I'm sure Bill will vouch for me.
George (down under)


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.