Attached below is a jpg file with the components of the auto section of
the RX-8 Engine
Which parts are required for changing manual to an auto?



Thanks

Regards David

The flex plate dwg is missing from this dwg. MT stands for manual
transmission
and AT stands for auto transmission.

Paul Lamar ...No rotor no motor.

-----------------------------------------------------------

The TIF File I sent you had both "Auto" and "Manual" it came in as FAX
but it did have the exploded view of the Auto Section.

All I'm trying to confirm is which bits are needed

EG flex palte counter balance although I could not see that on the auto
section
spacer plate crush plate in the centre and so on.
Part numbers were on them thanks.

Regards David


Here is your tif file again.
This is all I got. In the future please send jpgs as they display automatically
in all OS's and browsers.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.