Subject: Manual to Auto conversion parts question.
From: Rotary Engine
Date: 6/12/2007, 11:48 PM
To: AARotary Engine


Attached below is a jpg file with the components of the auto section of
the RX-8 Engine
Which parts are required for changing manual to an auto?

Thanks

Regards David

The flex plate dwg is missing from this dwg. MT stands for manual
transmission
and AT stands for auto transmission.

Paul Lamar ...No rotor no motor.

-----------------------------------------------------------

The TIF File I sent you had both "Auto" and "Manual" it came in as FAX
but it did have the exploded view of the Auto Section.

All I'm trying to confirm is which bits are needed

EG flex plate counter balance although I could not see that on the auto
section, spacer plate crush plate in the centre and so on.
Part numbers were on them thanks.

Regards David

--------------------------------

Here is your tif file again.
This is all I got. In the future please send jpgs as they display
automatically
in all OS's and browsers.

Paul Lamar ...No rotor no motor.

---------------------------------

Um, I see two pages, when I view it, Sorry.
However I have sent you a JPG of the Auto section
I'm not sure what viewer you are using and some do not display multiple
pages
I'll remember that in the future.

[attachment "R1728.TIF" deleted by David]

Regards David

I am using the very popular Thunderbird email program however I have
several other image program such as xpaint, vi, gimp, gnome viewer and
one or two others that the name escapes me at the moment.
Which one are you using?

If each page is a separate jpg I have no problem with that.
-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.