I got a price on the tiny holes from the laser guys in Simi Valley.
$250 minimum set up charge. Too much for me for R&D.
I talked to Klaus about how his Ellison has worked and he thought
it was not bad but the venturi part of it restricted
the airflow compared to his EFI setup on his O-200. I assume he has
a custom throttle body on there now. He got more HP with the custom
throttle body.
Here are some pictures of the Ellison carb he took off.
Klaus also mentioned that the exact time the fuel was squirted in was
critical
on a 2500 RPM aircraft engine (+/- 30 degrees) but he agreed with me that
it matters
not on a 7500 RPM engine. Another hidden advantage of the rotary.
The next 3D is the mechanical low pressure fuel injection I am going to
spend my R&D budget on. Both Hurant Karribian and I will be working on
essentially
the same thing.
The pressure regulator soak in 100LL gasoline was successful. I could see
no
deterioration in the air pressure regulator plastic parts. Of course that
is 100LL auto fuel with alcohol could be another matter.
BTW I did some further test on JB Weld by thinning it with 25% acetone
and it became very easy to pour. It set up but I can't vouch for the
strength as I did not test it. With a welded in SS P-port tube
we don't need the strength so sealing becomes its only function.
Paul Lamar ...No rotor no motor.
Paul,
Excuse the ignorance, but I know very little about different carbies. What
is the little short jet at the bottom of the long tube and what is the short
tube with the 3 holes for.
George ( down under)
I don't know the answer to the first question but the second question
answer is a pito tube. The air pressure is proportional to the square
of velocity and that is fed into the pressure regulator. I suspect
that raises the fuel pressure for a richer mixture. Tailoring all
these conflicting signals is a night mare and as Klaus pointed
out extremely time consuming. Ellison has been developing this design
for years. I don't think I want to go through all that.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.