Subject: Ellison type tube hole patterns and sizes
From: Rotary Engine
Date: 6/13/2007, 11:22 PM
To: AARotary Engine


Paul,
Excuse the ignorance, but I know very little about different carbies. What
is the little short jet at the bottom of the long tube and what is the short
tube with the 3 holes for.
George ( down under)

I don't know the answer to the first question but the second question
answer is a pito tube. The air pressure is proportional to the square
of velocity and that is fed into the pressure regulator. I suspect
that raises the fuel pressure for a richer mixture. Tailoring all
these conflicting signals is a night mare and as Klaus pointed
out extremely time consuming. Ellison has been developing this design
for years. I don't think I want to go through all that.

Paul Lamar ...No rotor no motor.

Paul,
Thanks, now that I have my glasses on that small tube now looks like a
reflection in a recess.
George ( down under)

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.