I did a conversion of the first page for you.

Though it might help if you are not seeing it.

Regards David

I did not see that one the first go around.

Paul Lamar ...No rotor no motor.

Paul,


I started working on the engine again today and found some less than
desirable attributes with the old semi-auto
bell housing I have.  Mainly interference with the starter motor.

Do you know if the RX-8 housing will mate up with the and 2nd gen 13B
engine.  Having the starter come in from the rear will give me a lot more
room to fit an CVT inside for the turbo-compound.

Any pictures, or diagrams would be appreciated.

Thanks

Doug

Yes I think it will. As I recall the RX8 housing has one additional
bolt but that should not be a show stopper.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.